How to sew Woven
Cotton Panties
Part1: Print and make
the pattern
1. Print the pattern
with the page size setting in printer setting is set as 'Actual size'
2. Check the printed pattern with your ruler.
3. Arrange the
printed below and join all pages with tape.
|
 |
4. Cut the pattern in
your size. (S,M,L)
5. Layout pattern on the fabric and cut it. Please note that the pattern included seam allowance.
Part2: Sewing
1. Sew gussets with
the back piece. Put the right side of gusset together. Put the back piece
between the gussets and sew with 0.7 cm or 1/4" seam allowance.
2. Sew the gusset
with the front side. With the back piece right side up, put the front piece
right side up between the gusset and sew with 1/4" seam allowance.
3. Turn inside out
4. Sew the side with
3/8" seam allowance. You can any types of seams e.g., zig-zag or Serger
but I prefer flat felled seam. For flat felled seam, trim one side of seam allowance
about half the width of the other seam allowance. Fold the wider seam allowance
over the narrower one. Press and sew on the edge.
5. Cut elastic width
0.5 cm 1 pcs for waist and elastic width 0.3 cm 2 pcs for leg hole.
6. Tie elastic in
loop
7. Double fold leg
hole hem 3/8" and sew elastic along the leg hole (both sides). Keep push
elastic to the side so you not sew over the elastic.
8. Double fold waist hem 3/8" and sew elastic along the waist. Keep push elastic to the side so you not sew over the elastic.
Finish 😊
